Evolution Power Tools R185SMS+ Sliding Miter Saw with Multi-Material Cutting, 45 Degree Bevel, 50 Degree Miter, 210 mm Slide, Blade Included Cuts Wood Plastic Metal & More, 7-1/4"

Build quality is for gentle work, finish work. Not framing. This is not a framing saw. No ground plug and small cord gauge. Miter is true, minimal blade wandering. Laser is on target. Motion is fairly smooth but not as nice as a high end saw. For the handyman home builder, this is a good finish saw. Will you break it? if you are a rough carpenter yes. For what it was designed for, it is a good value and useful. Pulls about 760 watts. Ample cord size for draw.

I was pleasantly surprised by how easy it was to assemble this saw from the moment I opened the box. The instructions were ergonomically designed, making it a breeze to follow along and identify all the parts. This was hands down the simplest assembly process I've ever encountered for a complex tool. Kudos to the engineer and ergonomic design team for a job well done! Once assembled, the robust quality and durability of the saw became apparent. It's clear that this product was well-thought-out and built to last. I am highly impressed with the excellent value for the price. Highly recommend this to anyone in need of a reliable tool!

This saw is amazing. Super smooth ball bearing slides, smooth starting motor, lots of power to cut through steel, which is the reason I bought it. It's also super lightweight so it's easy to move around. I couldn't be happier with my purchase and wish I bought it sooner! I did have to call Evolution because I wanted to buy a clamp that hooks on the front of the saw and clamps material back against the vertical fence. They exist, but I couldn't find them on their website. One call, 2 minutes on hold and I got a super nice rep who helped me place my order and the parts were in the mail immediately. Can't say enough great things about this company and this saw. Worth every penny.

"Precision dosing! Micro-measurements prevent waste. Error alerts save resources. Scientific-grade accuracy achieved. Lab-tested reliability assured."

What a fantastic saw! It cuts thick metal smoother than anything else!!! I recommend ordering a blade with more teeth, it comes with a 20 tooth blade. I had an issue with my saw, wasn't sure if it happened in shipping or was done by me... I called them, no questions asked. I had the replacement part in 3 days!!! Exceptional Customer Service 👌 The call was also answered Very Quickly. Highly Recommend 👍👍

Has done great with every project! Great value for the money. Easy to use and the blade is very on point with the cut! Bolted to a rolling cart and able to move it where I need it.

The Evolution R185SMS+ is a fantastic sliding miter saw! It effortlessly cuts wood, plastic, and metal with precision. The 45° bevel and 50° miter offer great versatility, while the 210mm slide ensures smooth operation. The included blade is sharp and durable. Compact yet powerful, this 7-1/4" saw is perfect for DIYers and professionals alike. Highly recommended!

This saw comes disassembled in 3 major parts for more compact packaging. They are the base, power head, and slider tubes. The connection between the power head and slider tubes is extremely questionable. Inside the hollow slider tubes are plastic cartridges with spring loaded metal pins. These pins are supposed to go through holes in the sliders and into holes in the power head locking them together. There's an actuator tip on the cartridge that has to be in the out position to contact the inside of the power head receiver and deploy the pins. This all has to be in precise alignment to work. On mine one of the holes in the slider tubes appears to not be offset from the end correctly and the pin couldn't deploy. After much messing around, I ended up pulling the cartridges out and forcing them to deploy just before reaching the holes. Shoving the power head on with the pins pre-deployed allowed them to lock into the holes. There are a few sentences in the manual addressing the fact that these pins need to be locked in place. I don't think the manual places enough emphasis on how important these pins are. If the power head came off while the saw was in use it would be potentially catastrophic. It seems like there should be a more positive and verifiable way to lock the head and sliders together. Outside of that the saw is adequate for the price I guess. It works and it's obvious a lot of thought went into it, possibly too much in the case of the over engineered spring pin cartridges. There's a lot of flex in the head. The fence and bed parts don't seem to align as precisely as one might hope. You get what you pay for as usual.

Pretty impressive little machine. Blade is very durable.

Máquina sem comentários. Linda, Forte e muito bem acabada. Mais uma conquista que só foi possível graças a Amazon. Empresa séria e comprometida com seus clientes.

Desde el desempaquetado, se puede ver y sentir la calidad de los materiales en su artesania y estructura, muy pequeña, ligera, y bonita. Ofrecí cambiar mi reseña al probarla. La compré anticipadamente para aprovechar la oferta del buen fin, ya la probé y usé. Me sorprendió gratamente, superior, nada ruidosa, fácil de cambiar el disco, 5/8 y volteas la arandela y acepta de 20mm. Lo que no me gustó es el sistema de recolección de aserrín, no sirve, todo se dispersa; el láser nunca se apaga, solo desconectando el equipo, o no he encontrado el botón, y está súper raro Calibrarlo, casi lo dejo inservible... La posición derecha para colocar la prensa se complica, debe abrirse porque al bajar el disco, el motor chocará sobre la prensa. No he usado el disco evolution, lo guardé, le puse uno diablo de 60 t que ya tenía en uso, una maravilla, tiene un kerf de 1.5 mm lo que le facilita la vida al motor, ni se oye, en comparación con otras sierras. Aunque para hacer saques, tendría que poner otro disco más grueso, para quitar más material en menos pasos... En fin, hay que organizarse según la sierrita, si es para obra o instalaciones. Y si es para usar en taller, pues agregando su mesa y apoyos opera de maravilla, Muy fácil de Calibrar si se te descalibran el inglete y el bisel. Tiene más cosas buenas Si eres hobista, una maravilla. Si eres profesional te va a fascinar. Visualmente, muy bonito equipo. A pesar de los comentarios en contra, me gustó mucho y la volvería a comprar, o quizás la grande de 10". Muy recomendable. Después de mucho tiempo, al fin decidí usar el disco para cortar metal, y WOW, es genial, corte tubular, y no se calienta, no deja rebabas, es un corte muy fino.

perfect for its price.

Excelente maquina solo que es de 7 1/4 y no de 10 " como la promocionan tiene muy buena potencia y es excelente el corte sin rebabas