2mm Double-Sided Adhesive Sticker Tape - for Smartphone, Tablet, PC, Laptops, LCD, Digitizer, Small Electronic Repair - Includes Pair of Tweezers, Microfiber Cleaning Cloth

This was my first experience replacing a screen/digitizer on a cell phone; however, I am an EE student so have experience with other electronic devices/repairs. While other brands got good reviews, this was the only one that was black, the same color as the original tape. I doubt that makes it any better quality, but since the phone was black I didn't want to risk seeing any white trim around the screen. While prepping the phone (Motorola Electrify M), I kept thinking this tape better be strong. The outside edges were roughly 1mm wide, so no much surface area to stick to. The top and bottom though had ample area. But this didn't disappoint! In fact, it's so sticky that it was difficult to move if I happened to lay it down correctly. The tweezers came in extremely handy for applying it too. Trust me, if you decide to go with another brand...you better pick some up, it was almost essential I used them. Took me about 20 min to lay out all the tape. Some areas were much wider, so I just laid down 2-3 strips side-by-side. I didn't do a 100% cover, but got most of it. The edges only need about 1mm, but rather than cut it I just folded the excess over. Worked fine. I also used the tape to fasten down other areas where tape got damaged when taking it apart. Once done, the screen held fast and secure. I shook it around and even tried to ply it up a little. It obviously started to come up (which is how I got the original screen off), but it gave ample/acceptable resistance. I'm sure it will strengthen a little over time too. The tweezers were also a great bonus. As another said, they're very sturdy and not cheap. The only drawback was the uncoated bare ends are not very smoothe. They had little jagged edges that could easily snag, but I just smoothed it out with some 220 grit sand paper. I'm sure they were added to the cost since most other brands were ~$3 roll, but as I said before, you're going to need them anyway.

Good tape used for back cover of phone after repairs no issues or cover movements at all

TLDR; This is the proper product for sealing new cellphone screens into place or back covers. It works very well and is comparable to factory adhesive. I repair many diverse devices and when used properly this product does not fail and works very well even over long periods of time. Proper usage is a bit tedious, remember not to touch either side with bare hands or dirty surfaces, use tweezers and a clean work space. Properly wipe down all services you plan to adhere against with isopropyl alcohol and dry before using. Cleaning and drying surfaces is a necessary step. This product includes a large amount of adhesive tape suitable for an (estimated) 20-25 cellphone repairs. Extended: The product is well packaged and protected with a resealable bag. The sides of the tape should not be exposed to dust so it comes with some white "wax paper" covers. This tape is very thin as it should be and is ideal for electronics repairs, particularly cellphone screen replacements and small component adhesion such as battery adhesion strips in mobile phones. There is a pair of fine tweezers included which absolutely come in handy. When properly used this product works very well. Many people who mentioned "failure" often touch the product with their hands when applying it and thus contaminate the sticky surface with oils. Another common mistake is to touch this against another surface accidentally or work in a very dusty environment. The tape is thin as it should be and thus surface area is small, any contamination will greatly affect performance. Also be sure to fully clean both surfaces with isopropyl alcohol. The surfaces you plan to adhere together with this need to be cleaned, even if they look clean already. They also need to fully dry (you can use compressed air to ensure this, alcohol dries very fast anyway). Never wipe surfaces with anything other than the lint free cloth included in this kit (or a brand new equivalent). If you do everything right as mentioned above the results will be great. I've used this exact product many times and never had any issue. Another huge advantage is that it behaves like factory double sided tape when attempting removal which means if the device needs to be repaired later (it will, if it broke once it will break again) then you will be able to easily reopen the device. I tested this with my usual repair methods via a heat gun to loosen the adhesive and it works very well with this tape. As a final tip, remember to place the circular protective covers back over the tape on both sides and store it in the original resealable bag when done. Do not leave it out on a desk or anywhere else as dust and other pollutants in the air can ruin the effectiveness of this product.

Worked good. If you are going to replace the screen glass on your s-3 with adhesive tape, it works great. The hardest part is getting off the old glass and glue which is like stiff gel. I used alcohol to help clean it off and that worked fine. When you pry the broken pieces of glass off the phone, be especially careful not to apply pressure on the display under the glue and especially with a sharp instrument. Maybe use a playing card for this as I saw one person on a video do. I used a 99 cent store utility knife to do it and though my results were almost great, it would be much easier for someone lacking experience with tools (I've been doing it my whole life), to use something thin and very hard but plastic. The tape is not wide enough to stay put very well though going up the sides of the phone it cannot be any wider. Do clean all old grit and glue off and things will be okay. I'm not really worried too much about the glass coming off, because this particular phone has a Ballistic Max case which came with a display cover which works with the touch screen still, though requires a tiny bit more pressure. This prevents the glass from ever getting loose and thus the need for glue in my opinion. Good luck ! Actually, the adhesive that comes with the screen glass ($8 or so for the kit here on Amazon), can be cut up and used for holding the glass (stock cut outs are not correct though the outer dimension is) and in that case you wouldn't need this tape I'm reviewing here at all. Plus this roll could probably do 200 phones so it's a terrible waste. Oh well, the company already made their money and most probably, the manufacturer does not offer 24 inches of tape. Oh, and by the way, this tape does the edges of the phone which would be a bit of a challenge to cut straight and narrow out of a wider piece. So this is where the tape is needed for the two pieces that go down the sides of the screen.

What can I really say. Its exactly as advertised. The microfibre cloth isnt half bad.not what I'd exactly call professional quality but good enough to clean off an LCD before you place glass on it. The tweezers are really really nice. surprisingly good quality metal. for something that was kind of just a bonus to the main article, Its a surprisingly good tool. The tape itself is the tape. Not much that can be said about it besides, Yeah, it sticks. really well I guess. Holds an LCD together nicely. 2mm wide as advertised, and doublesided as advertized. Nothing to write home about, but it does its job, and does it really well given how much it cost. The roll should las for years even if you're doing small-electronic repair for a damn living and using this every day. Didnt take the time or waste the money to fully unravel the roll and see if its exactly as long as it says, but its not like you're being shortcut. its still long as hell. Would reccomend it. Hell, buy it just for the tweezers if you like. They're honestly worth it.

Overall, this is a really strong adhesive tape. It's held my busted laptop bezel together perfectly for the last week or so when even liquid cement couldn't hold that thing down. It doesn't budge to my notice, so the grip it has is pretty good. However, it doesn't seem strong enough to keep my stubborn Sony Xperia Z3's back glass on and that was the entire reason I bought this stuff. It's certainly stronger than the other adhesives I had tried on my phone so I'll give it major props for that, but a week and a half in and that damned glass is coming up again. I can't imagine it lasting more than a few more days before it's popping off entirely. I'm wondering if using heat to melt the tape some would help, as can be the case in other adhesives, so I may attempt a re-application with that method. It gets three stars for being so great with my laptop and for holding one half of my phone's back screen on, but docked two for how quickly it started lifting on the other side again. I wish Amazon allowed for half star measures, because I'd really prefer to give this a 3.5/5. It's definitely better than "just okay" but not quite "great" either.

This is exactly what you need if you're working on a newer phone or piece of electronics that uses adhesive to bind parts together. Important to notes is that you should remove the old adhesive if you're going to apply new so that you don't affect the size as much as you would otherwise. Cell phone manufacturers usually use custom cut tape pieces that perfectly fit every area that they need to go, but for the DIYer you need something that you can mold and shape to get into the right position (I used the points of tweezers and the tip of a knife for this). Be careful not to overlap pieces or you'll increase depth, but overall, this product works well. It's holding my phone together right now. The included tweezers aren't great, but aren't bad. I found I needed two pairs to really hold and manipulate the tape (2mm is really small, that's the width of the tape, by the way) and the included ones are better than some precision ones I've used, but shouldn't be used for anything other than the tape as they're not very strong at the tips. I had to remove the pieces I had taped to do further repairs later, and it came apart just like the manufacturer's adhesive, but didn't shred as badly which means that I didn't have to reapply it for reassembly, which I like. Overall though, if you're looking to fix your phone, this is what you need. I love it and would buy it again.

I bought this item to help with fixing my kids cellphone cracked screen and to help put it back together. This item was more than enough for my job. But atleast i have leftovers for whatever double sided sticky things that needs to be attached to. Price wise its fair and quantity is enough since i have leftsovers. I suggest buying enough for the type of job you are planning to apply this to. Like cellphone repairs...electronic repairs and laptop repairs. You will need this for adherring components together. Quality is great for cellphone repairs as this item is small and thin. Perfect for the micro technician jobs. Durability is good. It does the job. I like that the seller supplied their customers with the tweezer. It really help. Without it i would have a longer time to do the job and become frustrated trying to apply this sticky tape by my fat hands and fingers. Lol. I would recommend this items to buyers that will try to fix their cellphones. Thank you. Great customer svc for before and after purchased. Cant complain. Item arrived on time. 5 star. Would buy again.

Utilizzato per sigillare la cover posteriore del mio galaxy s6 a seguito della rottura del vetro della camera. Facile da posizionare e mi sembra che la tenuta sia ottima. Utilissime le pinzette in dotazione.

Llegó un día antes de lo esperado, lo cual me vino genial porque tenia prisa por recibirlo. Cumple bien su función, la carcasa trasera de mi teléfono quedo bien pegada.

Used to close a lg 8x after a battery replacement. Easy to use and effectively resealed the case. Watch a few videos to get a feel for how to apply it. Tweezers will be needed. It came with a set.

Ottimo prodotto,👍

スマホの電池交換の際の裏ぶた固定用に購入しました。付属のピンセットが結構確りしていて細かいところもはりやすかったです。