ACS-TTOP Adaptive Cutting System Project Table Top | Portable Multipurpose Table Top with Integrated Guides for Precise Rip, Angled and Crosscuts

I've been using the adaptive cutting system for about 8 months. I've waited to review the system to ensure I've really been able to put the system through its paces. This is going to be a long review because I want to provide all of my findings. The short review is I love it and I don't really miss my tablesaw. Turning my tablesaw on caused me to experience a lot of anxiety so I decided to take the plunge and sell my tablesaw and buy this. I knew this would always be set up in my shop so the collapsible cart would be a waste for me. More expense and a waste of space below the cart. I bought the table and built a beefy for it to sit on. it houses my shop vac and accessories I use with this system. I'm also able to store my routers and circular saw in it. The dust deputy is housed outside because it would be too tall to fit inside. Dust collection: when hooked up to the system, it does a pretty good job collecting dust but the end of the cut always does it a little extra. I'm wishing in my garage and my wife doesn't want a lot of dust laying everywhere. In the other end of the table is a box fan with a high quality house fan filter to catch the extra dust. Cheap and works great. I don't have a choosing of dust everywhere after using this. I have found this to be extremely accurate in making my cuts. I've been building a lot of shop storage with half inch plywood and this is as accurate as I need it to be. I recently built some drawers using the 1/4, 1/4, 1/4 method. It was time consuming but it worked very well. This is a system that creates 1/4 inch grooves, 1/4 from the bottom of plywood that 1/4 inch plywood bottoms can be inserted into. There are 1/4 dados that run up the front and back of the drawer sides that the drawer front and backs lock into. This system worked quite well to mage those grooves. I did clean up the buttons with my router plane. This works so well that I'm considering selling my compound miter saw. I do need to make a few more miter cuts with this before I decide to do that. I've made a few cuts in oak. I think if you work a lot with 8/4 oak, this would be under-powered for you. It seems to struggle trying to make a full depth cut in 4/4 oak. I find myself sometimes making 2 cuts. I may come back and update this as I finish my shop builds and start working more with hardwoods.

This is exactly what I needed. The set up is not very complicated but I did watch some YouTube videos to take some of the worry about setting it up right away. I did have an issue with the top and ended up calling Kreg customer service and they were awesome. I wish I could remember the lady’s name that I talked to so I could give her a shout out. I’ve played around with it for about 2 weeks now to see what all I can do with it and am very happy with it. It’s a quality product from a quality company. I would not hesitate to buy from them again.

My table saw took up too much dedicated room in my shop and wasn't the safest for breaking down sheet goods. I had a Makita track saw for sheet goods and decided to try the ACS. It works! My only hiccup was that I needed to extend my standard Makita track since Kreg is designed for a 62" length track. If I didn't already have the Makita, I would have gone with the Kreg track saw and save the track rework. It is making my work easier. Before I had to put foam board on the floor or another sheet of ply to break a sheet down. It is now simple and also to cut down to smaller sections. I even use it to rip and crosscut solid wood. One thing to keep in mind is that without the folding cart they sell this table is not easy to move with one person. I'm still thinking of getting the stand (probably the best choice) or building a rolling base.

Love this setup. Allows me to break down ply and get table saw quality accuracy. Working with dog holes on a bench has also been a game changer for me. All works as advertised but dropping a few complaints: Where the guide track connects to the hinges brackets for the table, they should have 2 bolts on each side, not just the one (see photo). I notice when installing the track onto the brackets it easily gets slightly off skew once installed, which affects the cut. It would be nice if the guide was easier to remove and attach from the table. The measure tape strips do move around in their groove over time requiring me to recalibrate the measurement frequently. For the price would be great if the accessories were aluminum and didn’t feel like cheap plastic.

I am very please with this purchase. The Kreg project table has made all types of cuts possible and eliminated the risks when working on the table saw. Make sure you watch all the Kreg videos on YouTube so get everything dialed. I have read some of the bad reviews and I can tell that most if not all are user error related. Take the time and watch the videos and you won’t be disappointed. Thank you Kreg for this great tool.

The table makes projects sooo much easier. Assembly is easy and it folds up for space saving storage. Working with the Project Table makes cutting easy and extremely accurate. I look forward in using it and what my next project will be!! Love this table, wished I had it a long time ago.

ordered it, they sent me the wrong product. Went out and purchased one somewhere else. I do have the table. it's awesome and great to work with. I built my own stand for the table top to incorporate some drawers for storage. The hinge devices on the are flawed in their construction. There's "play" in the hinges that you need to be aware of every time you attempt to cut. The play is about 1/4 on one edge which WILL destroy your cut and make it as uneven as a store bought 2x4. The hinges need to simply lock into the table top and move upwards and downwards on a fixed track. Nothing elaborate-just move upwards and move downwards. No internal hinges to play with or screw into the track with a 1/8" tall screw. Second, the tabletop just isn't deep enough. it should easily be accommodate to a 36" using only the table. Instead, you need to buy an extension that locks into the front of the table table to cut something at 36". And then have a way for those extension to contact the floor for a solid base or buy the expensive saw horse from Kreg. Or just completely rework your cutting of you plywood pieces. Your choice. The point is, LOTS of extras go along with this item for proper/effective use. I figured I've got $1000 into the project table now (table top, track, track saw, track extensions, kreg saw horse, etc)

Took me awhile to decide if I wanted to spend this much for something I had not seen in person. So far I'm glad I got it. I also got the Kreg table base which make it easy to store. I already had the Kreg track saw and track. The cuts have been accurate and I look forward to using it more down the road.

Excelente!!

Produit de grande qualité, aucuns dommages apparents lors de la livraison. Livraison très rapide. Je suis très satisfait.

Good quality for what it is intended to do.

Great product for beginner to pro woodworker

When it comes to similar tables with dog holes, it seems there are really only two games in town, which are Kreg ACS and the more expensive Festool MFT (or a few more-expensive, more-niche players). Given that the market is so small, and given that so many of the track saws are able to inter-operate on each other's tracks, I would have appreciated Kreg's offering more if they engineered it with compatibility with other brands in mind. Instead, it seems like they have done the opposite. They are trying to corner you in to their brand by offering a "system" which is riddled with incompatibilities that will make it difficult to mix and match brands, and therefore force you to purchase the Kreg saw, track and table all at once. One thing is the length of the track and table. At 63", it's an uncommon length and hard to find of a different brand that spans the table without sticking out too far. A 55" (1400mm) track is more standard but falls just short of spanning between the two hinges on the Kreg table. So it almost forces you to use the Kreg 63" track, which has its own set of incompatibilities due to its 100mm distance between the raised ridge and rubber edge of the track, compared with the 120mm distance most track saws are built around. Another issue is the dog hole size. 20mm dog holes are pretty well standard, whereas Kreg insists on sticking with the imperial 3/4" dog holes, cutting you off from a range of accessories that are designed around the more popular MFT tables. I have a Bosch track saw and it took quite a while to find the right combination of hardware to make it work with the Kreg table. The Bosch tracks don't work on the Kreg hinge system. The Bosch saw doesn't work on the Kreg track due to the 100mm issue. Fortunately, a Makita 75" track will work with the ACS table and the Bosch saw, hallelujah! Kreg should try a bit harder to make their offering usable to owners of other brands of saws and tracks, or dog-hole accessories.