FREE

Description

TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies; faster motor acceleration/deceleration than stealthChop, these are also designed because stealthChop2 ultra-quiet technology is widely applied to 3D printing..
Compatible with existing 3D printer electronics, With a standard step/dir interface, it is easy to use. It can replace the original TMC2100 A4988 DRV8825 LV8729..
Major Features: UART configuration interface, CoolStep current dynamic adjustment technology, can save 70% of the energy; dcStep , stallGuard2 stall detection technology, Components on bottom PCB side for better heat emission; Automatic standby current reduction..
If there is any problem, please contact us via desertcart message..

Specifications #Interface: Step/Dir 1. Configuration: CFG Pins or UART 2. Native Microsteps: up to 1/256 3. MicroPlyer Microsteps: 1/256 4. Logic Voltage (VIO): 3-5V 5. Motor Voltage (VM): 4.75-36V 6. Motor Phase Current max: 1.2A RMS, 2.0A Peak. Therefore, the reference voltage of the driver module should not exceed 1V. At the same time, the driver module must be dissipated, otherwise it will affect the life of the driver module. 7. Internal V- Regulator: enabled 8. RDSon: ¡Ü0.3 Ohm 9. StealthChop (quiet): yes 10. SpreadCycle: yes 11. MicroPlayer 12. CoolStep: no 13. StallGuard: no 14. DcStep: no Note: 1. TMC2208 driver needs extra fan to cool it, otherwise the high temperature may destroy it. 2. Do not connect the motor when measuring the voltage, otherwise it is easy to burn the driver. 3. Power should be connected when measuring voltage, do not just connect USB power supply. 4. Please pay special attention to directions! Package Includes: 5 x TMC2208 Driver 5 x Heat Sink 1 x Screwdriver

Reviews

ERYONE TMC2208 V1.2 3D Printer Stepper Motor Driver Module with Heat Sink Screwdriver for Mother Boards Reprap MKS Prusa and More (5pcs/Pack)

Fast Delivery to Brazil

Easy Returns & Exchanges

Ask About This Product

Similar Products

› Industrial And Scientific › Additive Manufacturing Products › 3 D Printer Parts And Accessories

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Brazil. For more details, please visit our Support Page.

Frequently Asked Questions About ERYONE TMC2208 V1.2 3D Printer Stepper Motor Driver Module with Heat Sink Screwdriver for Mother Boards Reprap MKS Prusa and More (5pcs/Pack) in Brazil

Where can I buy ERYONE TMC2208 V1.2 3D Printer Stepper Motor Driver Module with Heat Sink Screwdriver for Mother Boards Reprap MKS Prusa and More (5pcs/Pack) online at the best price in the Brazil?

desertcart is the best online shopping platform where you can buy ERYONE TMC2208 V1.2 3D Printer Stepper Motor Driver Module with Heat Sink Screwdriver for Mother Boards Reprap MKS Prusa and More (5pcs/Pack) from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is ERYONE TMC2208 V1.2 3D Printer Stepper Motor Driver Module with Heat Sink Screwdriver for Mother Boards Reprap MKS Prusa and More (5pcs/Pack) available and ready for delivery in Brazil?

desertcart ships the ERYONE TMC2208 V1.2 3D Printer Stepper Motor Driver Module with Heat Sink Screwdriver for Mother Boards Reprap MKS Prusa and More (5pcs/Pack) to São Paulo, Rio de Janeiro, Belo Horizonte, Brasilia, Salvadorand more cities in Brazil. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the ERYONE TMC2208 V1.2 3D Printer Stepper Motor Driver Module with Heat Sink Screwdriver for Mother Boards Reprap MKS Prusa and More (5pcs/Pack) speedily without the hassle of shipping, customs or duties.

Does desertcart have 100% authentic ERYONE TMC2208 V1.2 3D Printer Stepper Motor Driver Module with Heat Sink Screwdriver for Mother Boards Reprap MKS Prusa and More (5pcs/Pack) online?

desertcart buys ERYONE TMC2208 V1.2 3D Printer Stepper Motor Driver Module with Heat Sink Screwdriver for Mother Boards Reprap MKS Prusa and More (5pcs/Pack) directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Is it safe to buy ERYONE TMC2208 V1.2 3D Printer Stepper Motor Driver Module with Heat Sink Screwdriver for Mother Boards Reprap MKS Prusa and More (5pcs/Pack) on desertcart?

Yes, it is absolutely safe to buy ERYONE TMC2208 V1.2 3D Printer Stepper Motor Driver Module with Heat Sink Screwdriver for Mother Boards Reprap MKS Prusa and More (5pcs/Pack) from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.