Desertcart
Explore

from USA
to Brazil
in 9-15 days
At your doorstep by Jun 28  to Jul 04 with standard delivery

Description

  • Manual-ranging digital multimeter measures voltage, current, temperature, frequency, and capacitance, and performs diode and continuity tests.
  • Average-sensing meter provides accurate readings when measuring linear loads where the current or voltage has a sinusoidal waveform.
  • K-type thermocouple has a temperature range of -35 to +750 degrees C/-30 to +1400 degrees F.
  • Magnetic hanger and built-in stand free hands for managing test leads.
  • Meets IEC safety standard 61010-1 and is certified for Category II installations up to 1000V, Category III installations up to 600V, Class II, Pollution Degree 2 for indoor use.
  • Imported from USA.
Style:B&K Precision 2706B The B&K Precision 2706B digital multimeter (also known as a multitester) is an average-sensing, manual-ranging meter that measures current, voltage, temperature, frequency, and capacitance, and performs diode and continuity tests in electrical applications. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuit's diodes. Temperature measurements are taken using a K-type thermocouple (included). The LCD is backlit for readability in low light. It displays the present measurement or the highest or lowest reading in a session, for tracking sudden changes in readings. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. The unit automatically turns off after 30 minutes of nonuse to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. A magnetic strap is included for hanging the meter from a metal door or surface for hands-free use. This average-sensing, or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform. It is a manual-ranging meter that requires the operator to choose the appropriate operating range for the property being measured. The LCD has a 2,000-count resolution, meaning it can display up to 1,999 units (3-1/2 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category II installations up to 1000V, which covers large household appliances and devices connected to a fixed power supply (such as refrigerators and air conditioners), Category III installations up to 600V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply), and Pollution Degree 2 for indoor use. The meter includes a set of detachable test leads, a K-type thermocouple, a spare fuse, a 9V battery, a magnetic hanger, and instructions. Specifications -------------- Maximum alternating current (AC) input 200 milliamps (mA) Maximum direct current (DC) input 200mA Maximum AC voltage input 750V Maximum DC voltage input 1000V Maximum resistance detected 40 megaohms Maximum capacitance 20 microfarads Maximum frequency range 40 kHz Other tests Diode and continuity Power supply 9V battery (one, installed) Safety ratings European Conformity (CE); International Electrotechnical Commission (IEC) safety standard 61010-1; European Union EMC (EN) EN61326 Weight Approximately 10oz./285g (including battery and hanger) Dimensions 165 x 78 x 42.5mm/6.5 x 3.1 x 1.7 inches (H x W x D) H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltage. Safety ratings are based on International Electrotechnical Commission (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating. B&K Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives. What's in the Box? ------------------ * B&K Precision 2706B digital multimeter * Set of test leads * Spare fuse * 9V battery (installed) * K-type thermocouple * Magnetic hanger * Instructions
Reviews

B&K Precision 2706B Manual Ranging Tool Kit Digital Multimeter with Temperature

Style
B&K Precision 2706B
Quantity
1

Related Pages

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. Desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Brazil. For more details, please visit our Support Page.